HenanXingyang Mining Machinery Manufacturing Factory （XKJ GROUP）is a good rod mill manufacturer in China. It has rich production experience. In the manufacturing process of mechanical equipment, high wear-resistant and compressive raw materials are selected, which not only reduces the loss of equipment , and make the equipment more sturdy and durable, the failure rate of the whole machine in operation is low, and the service life is long. Benefit early, benefit from high-level work, and rational use will greatly increase our work efficiency.

The working principle of the rod mill with a daily processing capacity of 250 tons: When the rod mill is working, the motor drives the cylinder to rotate through the reducer and the surrounding large gears or the low-speed synchronous motor directly through the surrounding large gears. The barrel is filled with appropriate grinding media - steel rods. Under the action of centrifugal force and friction force, the grinding medium is lifted to a certain height and falls in the state of throwing or falling. The ground material enters the cylinder continuously from the feeding port and is moved by the moving grinding medium. Crush, and discharge the product out of the machine through the force of overflow and continuous feeding, so as to carry out the next stage of operation.

The internal structure of the rod mill is mainly composed of motor, main reducer, transmission part, cylinder part, main bearing, slow speed transmission part, feeding part, discharging part, ring seal, thin oil lubrication station, large and small gear jet lubrication, The basic part is composed of the main reducer with parallel shaft and hard tooth surface.

The 250-ton daily processing rod mill demonstrates its product features from three aspects:
1. In terms of product quality: Xingkuang Machinery Rod Mill products continue to adhere to the concept of strict quality control, and do not let a single unqualified product pass through. The materials are high-quality, the size is accurate, and the error cannot exceed the range. , to ensure that the equipment delivered to the customer is a qualified product, and to be the rod mill product that the customer can rest assured.

2. In terms of product technology for rod mills: science and technology are developing rapidly now. The technical department of Xingkuang Machinery has been studying and learning the application technology of new equipment, and strives to test the water for improving the standard of the entire mine beneficiation industry when new equipment enters the market. Also strive to make the new rod mill equipment meet with you as soon as possible.

3. Rod mill In terms of product performance: The performance of the rod mill is already in the forefront of the entire mining and mineral processing industry. Yingkuang Machinery will still carry out professional research and strive to design a rod mill with performance that better meets the needs of the public.

Daily management of 250-ton rod mills: most of the rod mills are produced continuously for 24 hours, so the machines basically rotate continuously. At this time, daily management and maintenance are particularly important. In daily management, we should pay attention to check the use of lubricating oil in each component, regularly check and repair the lubricated parts, and add lubricating oil. Because there will be a certain amount of dust in the production process, the use of lubricating oil will be damaged very quickly. We have to deal with two aspects. On the one hand, we need to increase the frequency of lubrication. Ensure that there is maintenance of lubricating oil at all times. On the other hand, we need to clean up and protect dust to extend the service life of lubricating oil as much as possible.
Regularly clean the excess dust from the rod mill, and then take some protective measures to prevent excessive dust from entering the parts that need to be lubricated. Generally speaking, the working environment of the rod mill is relatively harsh, and there will be a lot of dust or sundries. Therefore, when we shut down for maintenance, we need to clean up the dust. The cleaning work mainly has two aspects. On the one hand, it can improve the life of the equipment, and the working time in an environment without dust will be longer and the life will be longer. On the other hand, it also improves the quality of our raw materials, avoiding dust pollution to our raw materials, and can greatly improve the quality of products.

XKJ GROUP always relies on the trust of customers and its own high-quality rod mill products, but how to gain the trust of customers, taking the production of rod mills as an example, has strict requirements in terms of quality, technology and performance, and works hard , casting high-quality products, so that users can use them well, and their trust will naturally increase. If you are interested in our products, please search for the "Henan Xingyang Mining Machinery Manufacturing Factory" approval mark and consult us. We will win your satisfaction with our sincere service and products.