【Introduction】:An air-inflation mechanical agitation floatation cell without slurry suction.
【Improvement】:Taper impeller with its blades sloping backward at certain angle, simple structure, strong agitation ability, and low energy consumption The impeller is equipped with holey cylinder air allocator. The air scattering is uniform and the mixing effect of air and slurry is good U-shaped tank, little sedimentation of sand
1.Low energy consumption, 30-50% savable;
2.Solid particles can be fully suspended; high flotation index ;
3.Long service life of vulnerable parts ;
4.Mechanical agitation; non-automatic air and slurry suction; ladder is necessary during processing;
5.It can be combined with model XCF as a flotation cell set, working as direct flow cell.
Model | Valid Volum (m³) |
Capacity (m3/min) |
Impeller Model | Impeller Power(kw) | Scraper Model | Scraper Power(kw) | Dimention (L×W×H) (mm) |
Weight(t) |
JJF-2 | 2 | 1.0-3.0 | 7.5 | 443 | 25 | 1.5 | 1400×1400×1100 | 1670 |
JJF-4 | 4 | 2.0-4.0 | 11 | 305 | 25 | 1.5 | 1600×1400×1100 | 2350 |
JJF-8 | 8 | 4.0-8.0 | 22 | 233 | 25 | 1.5 | 2200×2900×1400 | 4500 |
JJF-10 | 10 | 5.0-10 | 22 | 233 | 25 | 1.5 | 2200×2900×1700 | 4820 |
JJF-16 | 16 | 5.0-16 | 27 | 180 | 25 | 1.5 | 2850×3800×1700 | 8000 |
JJF-20 | 20 | 5.0-20 | 37 | 180 | 25 | 1.5 | 2850×3800×2000 | 10500 |
What impact will the grinding media wear of the ore dressing ball mill have on product quality?
2025.03.29Why does the rotary kiln use bituminous coal instead of anthracite as fuel?
2025.03.28What are the supporting equipment in the rotary kiln calcining system?
2025.03.27Causes of ball mill bearing wear
2025.03.26