Three ways for gold ore processing : 1.Gold cil & cip 2.Gold washing machine & gold Gravity 3.gold flotation. please see the contents below：1.Gold ore CIL & CIP process Gold CIL (Carbon in Leach)leaching process, namely Carbon leaching extraction, it is a process of adding activated Carbon to the slurry and simultaneously leaching and adsorbing gold. This process including leaching pulp preparation, cyanide leaching, activated carbon adsorption, the electric shock to get gold mud, ...

Fluorite ore raw ore is fed into a jaw crusher for coarse comminution by a vibrating feeder, and conveyed by a belt conveyor into a fine crusher (or impact crusher, cone crusher, hammer crusher) for secondary crushing and passing through a vibrating screen. Screening, qualified particle ore through the belt conveyor into the ball mill for grinding operations, the ball mill and the spiral classifier constitute a closed circuit, that is, the ball mill grinding material into the classifier for clas...

Lead-zinc ore beneficiation method introduction:The process flow of lead-zinc ore is selected, according to different types of ore, then choose a different beneficiation method, it also requires different lead and zinc ore processing equipment. Sulfide ore is usually floated. Oxidized ore is treated by flotation or re-election and flotation, or flotation, or flotation, or re-flotation with sulfuric acid. For multi-metal lead-zinc ore, it is generally used magnetic-floating, heavy-floating, heavy...

Silver ore beneficiation process: flotation and cyanidationSilver-bearing ore is mainly divided into two categories: silver-gold ore and lead-zinc-copper associated ore. Its silver production accounts for more than 99% of the total output. The gold ore beneficiation method mainly uses flotation or cyanidation. The main factor that determines the use of flotation or cyanidation is the composition of silver minerals. When the silver minerals are mainly silver and silver, flotation and cyanidation ...

The TDG Speed governing constant weight feeder is a new type of conveying, feeding, weighing and controlling device, which can be digested, absorbed and improved on the basis of advanced technology at home and abroad.It is suitable for weighing and quantitative feeding in the process of dynamic conveying of the block, the material solid material or the powder material,and is widely used in the industries of cement, electric power, metallurgy, chemical industry, food, feed, and other industr...

The material is fed to the belt of the belt feeder through the feed hopper, with the rotation of the AC speed regulating motor, the belt is moved forward slowly, and the material on the surface is put into the next working procedure through the first round. It can be widely used in metallurgy, mineral processing, building materials, coal, hydropower and other industries, and can also be used for conveying bulk bulk granular materials with a bulk density of 0.5-2.5t.

The disc feeder is widely used in metallurgy, mining, building materials, coal, electric power and other industries of all kinds of viscous material feeding. As a fine material feeding device, applicable to transport powdered, granular or small state of non viscous materials, such as coal, cement, clinker, limestone, shale, coal, clay and other powdered, granular material. Widely used in gold concentrator, mining with chemical plants, infrastructure and machinery foundry and other continuous an...

Swaying feeder is used as feed equipment for ball mill and belt conveyor, there are two ways to adjust the amount of ore: 1.Adjust the eccentricity of the eccentric wheel. 2. Adjust the ore gate. This machine is an auxiliary device for the transport machinery, suitable for concentrator, smelters, cement plants, placer, machinery casting workshop and other departments in the suspension steel structure, installed in the lower part of the hopper made by continuous feeding. Uniform, quantitative ...

Chute feeder is generally lifted on the ore storage bin discharge port. The bottom plate can be used for reciprocating motion to realize the ore feeding. The stroke is 20-60 times /min, travel is 20-200mm. The amount of ore feeding is decided by the size of the stroke, and the stroke adjustment method is as follows: adjusting the eccentricity of the eccentric wheel of the driving device.

Vibrating feeder is used to feed block or granule materials from material storage to a charging device evenly and continuously. Used to achieve an even feeding for crushers in sandstone production lines, and to make a rough screening of materials, this equipment is widely used in mining, metallurgy, coal, light industry, electricity, machinery, food and other industries.

Mining machine GZG series motor vibrating feeder with good performance is used to feed lump, grain and powder material to receiving device from storage bin or hopper at a continuous and even flow during production. This vibrating feeder is suitable for feeding the bulk, granular and powdery material from the raw ore bin or the intermediate silo to the receiving device, and widely used in mining metallurgy, coal, glass, machinery, light industry, chemical industry, electricity, food and other in...

ZSW vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. ZSW vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through the driving of motor, the two eccentric shafts start to rotate to...

Plate feeder Mainly divided into three types, heavy plate feeder,light plate feeder,middle-size plate feeder. This machine is used to continuously and uniformly feed primary crusher in crushing/classifying workshop of large scale beneficiation plant, or cement or building material sectors. It can be also used to convey materials with bigger particle sizes and specific gravities in a short distance.

Medium sized plate feeder is widely used in building materials, metallurgy, electric power, coal, chemical industry, foundry and other industries, especially suitable for conveying some solid materials with high temperature, large size, sharp edges and strong grinding ability.

Heavy duty apron feeder is a large machine that carries materials through the parts of a manufacturing or industrial process. These machines resemble short conveyor belts, and may also be known as plate feeders or apron conveyors. Apron feeder machines allow engineers and process managers to automatically control the volume of materials that are added to a process, and regulate the rate at which these materials are added. To withstand the heavy weight of these types of materials, the belt portio...