Chute feeder is generally lifted on the ore storage bin discharge port. The bottom plate can be used for reciprocating motion to realize the ore feeding. The stroke is 20-60 times /min, travel is 20-200mm. The amount of ore feeding is decided by the size of the stroke, and the stroke adjustment method is as follows: adjusting the eccentricity of the eccentric wheel of the driving device.
Chute feeder is suitable to be used in ore beneficiation, coal, chemistry and other industrial departments and it is able to take out the granulate massive materials from the storage bin and send them to different types of material receiving devices, but it is not suitable for feeding concentrate powders or other powdery materials.
1 Simple structure, even feeding, good continues performance;
2 Change and control flow and feeding volume at any time;
3 Stable transmission, high efficiency;
4 Compact structure, reasonable design;
5 Excellent quality, wide application.
Model
|
Outlet Dimension (W X H) (mm)
|
Max. Feed Size (mm)
|
Feed Capacity (t/h)
|
Motor Model
|
Motor Power
(kW)
|
Weight
(kg)
|
CG300X300
|
300X300
|
50
|
10~20
|
Y90L- 4
|
1. 5
|
265
|
CG400X400
|
400 X400
|
100
|
10~30
|
YCT160-4A
|
2. 2
|
640
|
CG600X500
|
600 X500
|
200
|
10~50
|
Y112M- 4
|
4
|
1045
|
CG700X500
|
700 X500
|
200
|
10~60
|
1100
|
||
CG1240X980
|
1240X980
|
350
|
36~90
|
Y160M- 6
|
7. 5
|
1710
|
Analysis of lithium ore dressing technology and key equipment
2025.04.21There are the following differences between intermittent ceramic ball mill and continuous ceramic ball mill:
2025.04.18Lubrication of sliding bearings in daily maintenance of ball mill
2025.04.17Phosphate ore dressing method and reagent selection
2025.04.16