The rod mill has technological innovation and better performance, mainly characterized by high degree of automation, low operating cost, high efficiency, energy saving, large output, less pollution and easy maintenance. The rod mill can effectively improve the grinding efficiency in the mineral processing production line, and can benefit early and benefit from advanced work in non-metallic mineral processing or high-grade ore processing. It can rationally select every valuable mineral particle and reduce the amount of materials entering fine grinding. Hardness, to achieve the effect of increasing efficiency.
Rod mills are available in two forms: dry and wet. However, wet rod mill equipment is currently used, and users can choose according to their actual conditions. Yingkuang Rod Mill manufacturer adopts controllable feeding and discharging technology, combines the actual grinding materials with suitable grinding bodies, and changes the traditional surface contact to line contact, so that the discharged particle size is more uniform and the output is higher. Rod mills are widely used in refractory, chemical, metallurgical, glass and other industries and in grinding operations that require relatively high uniformity of ground products. In recent years, they are also used in the sand making industry of construction sand.
The following points introduce the product performance of the 2-meter-diameter rod mill:
1. In terms of product quality of rod mills: Yingkuang Machinery’s rod mill products continue to adhere to the concept of strict quality control, and no unqualified products will be allowed to pass. The materials must be of high quality, the dimensions must be accurate, and the errors must not be allowed. Exceeding the scope, we ensure that the equipment delivered to customers are all qualified products, and we make rod mill products that customers can rest assured.
2. Rod mill product technology: Nowadays, science and technology are developing rapidly. Yingkuang Machinery has also been studying the application technology of new equipment, striving to bring new equipment to the market to test the waters for improving the standards of the entire mining and mineral processing industry. At the same time, it also strives to use The new rod mill equipment will meet with you as soon as possible.
3. In terms of product performance of rod mill: the performance of rod mill is already at the forefront in the entire mining and mineral processing industry. XKJ GROUP Machinery will still carry out professional research and strive to design a rod mill with more suitable performance.

XKJ GROUP rod mill has obvious advantages and is currently a popular grinding equipment among users. However, the rod mill operates under high pressure in high temperature weather, and the temperature inside the equipment is prone to high temperatures, thus affecting the quality of the product. Mining machinery controls the temperature inside the equipment during the production process, discovers and solves problems promptly, and ensures normal and stable operation of the equipment at all times.
What should be done when the rod mill with a diameter of 2 meters is hot in summer? What points should be taken to cool down?

1. Water spray cooling inside the mill: Water spray cooling inside the mill is modified on the basis of cold water cooling outside the mill. Water and compressed air are sprayed into the mill in an atomized state, making use of the water volume and the evaporation of water. The latent heat at the time effectively takes away the heat in the mill. However, it should be noted that the amount of water sprayed is about 1~1.5% of the cement, and generally does not exceed 2%. Otherwise, the water cannot be completely evaporated and the strength performance will deteriorate.
2. Add water spray device: It is feasible to spray water from the grinding head or grinding tail. The water mist device can not only avoid high-temperature operation of the rod mill, but also prevent dust and reduce pollution. It is a popular method at present.
3. Strengthen the ventilation inside the rod mill: This is a simple method. The cooling air volume of the mill can be calculated based on the heat balance of the rod mill. To strengthen the ventilation inside the mill, attention should be paid to reasonable ventilation. If the air volume is too large, it will cause powder The grinding effect becomes economical.