What are the characteristics and advantages of rod mill products?

1. Save power
Compared with old equipment, it saves power by more than 40%. The particle size of the product is relatively uniform, with less coarse particles and slime. Comparing the particle size characteristics of the rod mill product and the ball mill product, the product particle size characteristic curve of the rod mill working in open circuit is almost the same as that of the ball mill working in closed circuit.

2. Uniform particle size
When the material mixed with coarse grains rises along the liner, the rod mill allows the fine materials to pass through the gaps, which is also conducive to crushing the coarse grains and making the coarse grains concentrate at the place where the grinding medium hits. Therefore, the rod mill The product particle size of the machine is relatively uniform.
3. Large processing capacity
During the grinding process of the rod mill, the grinding medium is in line contact with the ore, so it has a certain selective grinding effect. Especially when used for coarse grinding, the processing capacity of the rod mill is much larger than that of the ball mill of the same specification.

4. Less over-crushing
The particle size characteristic of the rod mill product is related to the state of the ore crushed by the rod mill. When the rod mill hits the ore, it first hits the coarse particles, and then grinds the smaller ore particles, thereby reducing the risk of over-crushing.
5. Adjustable discharge fineness
The granularity of the output can be changed through simple adjustments. The built-in fineness control device can be equipped with a screening device for the output, and two checks to ensure that neither excessive grinding nor unqualified products will be mixed into the finished product.

XKJ GROUP, rod mills and ball mills have been produced by old manufacturers for many years, and can produce various types of rod mills, ball mills, and rod mills. There are two types of dry and wet types to choose from, and users can choose according to their actual conditions. choose. The detailed parameters are as follows:

Rod mill scope of application:
1. In gravity separation plants or magnetic separation plants of tungsten-tin ore and other rare metal ores, in order to prevent over-crushing of valuable minerals, over-crushing and light rod mills are often used in the coarse grinding stage.
2. In some cases, it can replace the short head cone crusher for fine crushing. When dealing with soft or not too hard ores, especially ores with more mud and more viscous, when the short-head cone crusher is used for fine crushing, not only the dust is large, but also it is easy to cause blockage of the fine crusher. If the rod mill is used instead For fine crushing, it can be said that the 20-30mm ore is ground to 6-10 meshes, which not only reduces the cost, but also simplifies fine crushing and dust removal. serious. For hard ore, whether to use a rod mill or a short-head cone plus a sieve closed circuit must be determined according to the specific situation and compared.

3. When the rod mill is used for coarse grinding, the particle size of the product is 3-1mm. The production capacity of the rod mill is larger than that of the ball mill of the same specification, but when the rod mill is used for fine grinding, the grinding is 0.5mm.
4. Reducing noise pollution within a reasonable range is what users and manufacturers are pursuing. Xingyang Mining Machinery will also work harder to improve user experience satisfaction with equipment, and design and manufacture more mining equipment that meets user needs.