Many construction sites are equipped with crushers, but the noise of the crushers during construction is too loud, which will cause serious noise pollution and affect people's physical and mental health. So how can the noise be reduced?The following me has sorted out several methods for you：

What should I do if the noise of the crusher is too loud during construction?

1. Adjust the spring preload pressure

Sometimes the chance of crushing is due to the inertial force generated by the insufficient preload pressure of the spring, which causes abnormal noise in the equipment. The user can adjust the compression force of the spring to reduce the noise of the equipment, but the pressure of the spring must also be paid attention to, not too loose or too tight, and grasp it well.

2. Ensure that the flywheel is running normally

When the V-belt is not tightened properly, it may cause the flywheel to rotate abnormally and deviate from the position of the machine. At this time, it will cause the crusher to produce noise, so it is necessary to ensure that the V-belt has a suitable tightness.If the position of the flying groove wheel is improper, you need to remove the flying groove wheel and readjust the position.

3. Strictly control the feeding

Control the feeding situation of the crusher, prohibit the particle size or water content of the material from exceeding the feeding requirements of the crusher, and prohibit impurities from entering the equipment when the operator is operating the crusher, which can effectively prevent the equipment from producing abnormal noise during work and extend the service life of the crusher.

4. Fasten parts in time

Since the crusher will have a greater impact during work, it may cause the internal parts of the equipment to fall off or loose. It is necessary to regularly check the fastening of the internal parts of the equipment and tighten the nuts and bolts of the equipment in time. Parts such as bolts.

5. Do a good job of lubrication

The last point is to do a good job in the lubrication of the crusher. Poor lubrication will cause the operation of the crusher to be uncoordinated, resulting in abnormal noise. Therefore, the crusher should be cleaned regularly and the lubrication and maintenance of the crusher should be done well, so as to ensure the coordinated and efficient work between the equipment parts and reduce the generation of noise.

Reducing the noise of the crusher is actually a way to maintain the crusher, which not only reduces noise pollution, but also extends the service life of the crusher.XKJ Group specializes in the production of various crushers and is trustworthy. If you are interested in crusher equipment or have other questions, please contact us and we will answer them enthusiastically.