Steel slag rod mill is a kind of equipment with a horizontal simple cylindrical structure, and steel rods are installed inside as the grinding medium, which has high strength and hardness, and can have a greater impact on steel slag. Ying mine steel slag rod mill adopts the structure of peripheral feeding and middle discharging, the feeding particle size is ≤25, and the output is below 5mm. The slag is ground by different grinding, impact and grinding of steel rods. Then the steel slag Compared with other similar products, what are the advantages of the rod mill in the process of use? What are the precautions? What aspects of daily maintenance and maintenance are required? Here is a brief introduction for the majority of customers and friends, hoping to get good enlightenment and inspiration from it.

The steel slag rod mill uses a new type of steel rod as the grinding medium, and the steel rod has high hardness, strong toughness, and continuous rods, which can grind any high-hardness physics. Compared with other rod mills, Xingkuang steel slag rod mill has outstanding output, low noise of finished products, less powder, easy to operate, saves time and electricity. It is a grinding equipment for steel slag recycling. The advantages of steel slag rod mill are as follows:

1. Rolling bearings are used, saving 20%, and the service life is generally more than 10 years.

2. The parts adopt special technology and have a long service life. The service life of cylinder body, end cover and large gear can reach 15 years.

3. The feeding is controlled by frequency conversion, the feeding is uniform and the feeding volume is large.

4. The slow transmission device is convenient for equipment maintenance and can realize mechanical and electrical interlocking.

Steel slag material:

An industrial solid waste. The slag discharged from steelmaking is divided into converter slag, open hearth furnace slag and electric furnace slag according to the furnace type. The discharge amount is about 15-20% of the crude steel output. Steel slag is mainly composed of oxides of calcium, iron, silicon, magnesium and a small amount of aluminum, manganese, phosphorus, etc. The main mineral phases are tricalcium silicate, dicalcium silicate, calcium magnesium olivine, calcium magnesium rhodoxene, calcium aluminate ferrite, and solid solutions formed by oxides of silicon, magnesium, iron, manganese, and phosphorus. Contains a small amount of free calcium oxide, metallic iron, fluoroapatite, etc.

Daily management of steel slag rod mills: most of the steel slag rod mills can be produced 24 hours a day, so the machines basically rotate continuously. At this time, daily management and maintenance are particularly important. In daily management, we should pay attention to check the use of lubricating oil in each component, regularly check and repair the lubricated parts, and add lubricating oil. Because there will be a certain amount of dust in the production process, the use of lubricating oil will be damaged very quickly. We have to deal with two aspects. On the one hand, we need to increase the frequency of lubrication. To ensure the maintenance of lubricating oil at all times, on the other hand, we need to clean up and protect the dust to prolong its service life as much as possible.
The steel slag rod mill cleans the excess dust regularly, and then takes some protective measures to prevent excessive dust from entering the parts that need to be lubricated. Generally speaking, the working environment of the steel slag rod mill is relatively harsh, and there will be a lot of dust or sundries. Therefore, when we complete a production, we need to clean up these stains. There are two main functions of the cleaning work. On the one hand, on the one hand, it can increase the service life of the equipment, and the working time in the link without stains will be longer and the service life will be longer. On the other hand, the quality of our raw materials is also improved, which avoids the pollution of our raw materials and output by stains, and can greatly improve the quality of products.

When the steel slag rod mill changes its output, it should also pay attention to daily maintenance and maintenance, so as to prolong the service life of the product. Next, Xingyang Mining Machinery will be guided by the spirit of the 20th National Congress of the Communist Party of China, firmly establish and practice the concept of "lucid waters and green mountains are golden mountains and silver mountains", continue to optimize the energy structure, and actively build a green and low-carbon environment with its own characteristics The mode of production is gradually transformed and developed. At the same time, if you want to know other information about the steel slag rod mill, you can call Henan Xingyang Mining Machinery Manufacturing Factory, and you can also conduct online consultation and purchase. We will seriously serve every customer and make every product unique. Has a good quality.