The mining single-tank flotation machine is driven by a triangular motor to drive the impeller to rotate, which produces a centrifugal effect to form a negative pressure. On the one hand, sufficient air is inhaled to mix with the ore slurry, on the other hand, the ore slurry is stirred to mix with the drug, and the foam is refined at the same time, so that the mineral is bonded to the foam, floats to the surface of the ore slurry and then forms a mineralized foam.Adjust the height of the gate and control the liquid level so that the useful foam is scraped out by the scraper.

Instructions for the use of single-tank flotation machine, single-tank flotation machine mining single-tank flotation machine should check all parts of the bolts before starting up, and manually rotate the wheel before stopping and starting to prevent sedimentation and increase the motor load. The height of the gate should be carefully adjusted during work to keep the liquid level stable, and the mineralized foam on the slurry level should be scraped into the flow tank at any time.The impeller and stator of the flotation machine should be kept at a certain distance, and care should be taken to replace them when they are worn out. The bearings in the pump body should be maintained every three months.

The single-slot flotation machine has the following characteristics: The single-slot flotation machine has a large suction volume and low power consumption.Each tank of the single-tank flotation machine has the triple functions of suction, slurry suction and flotation. It forms its own flotation circuit without any auxiliary equipment and is configured horizontally to facilitate process changes.The slurry circulation is reasonable, which can minimize the precipitation of coarse sand.It is equipped with an automatic control device for the slurry surface, which is easy to adjust.The impeller of the single-slot flotation machine has backward-leaning upper and lower blades.The upper blade of the mining single-tank flotation machine produces the upper circulation of the slurry, and the lower blade produces the lower circulation of the slurry.

Xingkuang Group specializes in the production of flotation machine equipment with complete models. If you are interested in flotation machines, please contact us!