In the mineral processing industry, there are many factors that affect the output of ball mills. If the materials cannot be smoothly and continuously fed into the ball mills for grinding, then the production output of the equipment will also be greatly reduced.In this article, through the optimization case of the feeding device of the ceramic ball mill, everyone can understand the improvement method of the inlet of the ball mill in more detail.

1. When the inlet is installed, there must be a certain angle to make the material feed smoothly under the action of gravity, and to prevent the phenomenon of clogging at the inlet.

2. From the point of view of the problems caused by the inlet, the main problem is the cutting slip.

3. Change the cutting chute at the inlet to a cylindrical inclined cutting chute, so that the central control spiral net space is given up and good ventilation conditions are created for the ball mill.

4. To improve the ventilation of ball mills, many machinery companies have made great efforts and explorations in this regard.

5. It is necessary to increase ventilation and reduce the particle size of the grinding material, so that improving the output and quality of the ball mill is a very critical step.

6. The combination of setting the blast on the grinding head of the ball mill and increasing the exhaust of the grinding tail is combined. Although it has a good effect, it increases the energy consumption of the fan and the difficulty of handling the dust collection system of the grinding tail, so the effective way is to improve the inlet of the ball mill.

7. A steel pipe is introduced into the mill at the inlet to enlarge the body, and hot air is introduced at the appropriate time to reduce steam condensation in the mill and reduce the temperature difference in the mill.

8. Fix the liner on the lower half of the cylinder of a small ball mill to improve the wear resistance of the cutting drain and protect the inlet well.