With the development of the electric vehicle industry, the demand for lithium batteries continues to increase. Lithium ore is used as a raw material for lithium batteries to promote the development of the lithium ore industry. XKJ GROUP is a manufacturer of lithium ore rotary kiln equipment. Lithium ore rotary kiln is a large-scale high-energy-consuming thermal equipment. XKJ GROUP rotary kiln equipment manufacturers continue to research and develop equipment in the direction of low energy consumption. Energy-saving kiln equipment is inevitable. the trend of. The following article will introduce to you the energy-saving method of lithium ore rotary kiln.

The lithium ore rotary kiln chooses a reasonable proportion of air: XKJ GROUP has analyzed the energy-saving measures in detail according to the characteristics of the lithium ore rotary kiln. It can choose a reasonable proportion of primary air to improve thermal efficiency and reduce fuel coal consumption.

Selection of insulation materials: Rotary kiln can ensure energy saving, and it is also very important in the use of product materials. Insulation materials are widely used on the furnace body and flue to reduce heat loss and achieve the purpose of energy saving.

The exterior of the lithium ore rotary kiln uses thermal insulation materials: the heating efficiency of the lithium ore rotary kiln is high, but if the thermal insulation effect is not good, the lithium ore rotary kiln will dissipate heat quickly, which will reduce the output. We aim at the large surface heat dissipation of the lithium ore rotary kiln. The problem of rapid heat dissipation can be solved by adopting new high-yield thermal insulation materials, so as to achieve the purpose of energy saving.

Avoid idling when in use:

Lithium ore rotary kiln is a large-scale calcination equipment, and the starting energy consumption of lithium ore rotary kiln equipment is large, so it is necessary to adjust the operation time and sequence to avoid equipment idling as much as possible.

Transformation and use of functions:

Jet pumps are used as vacuum equipment in the reduction workshop, and waste heat boilers and air heat exchangers are installed on the flue of the reduction furnace. The steam generated by the waste heat boiler is used by the jet pump, and the hot air from the air heat exchanger is sent to the reduction furnace as combustion-supporting air, thereby achieving the purpose of energy saving;

Strengthen the management of the production process:

in the process of material operation, it is necessary to eliminate the phenomenon of running, popping, dripping and leaking in production;

Use energy-saving motors:

the lithium ore rotary kiln and its equipment all use new energy-saving motors.